If you are building in Gurgaon, material prices decide a large part of your budget, and they change every month. This page gives you the current construction material rates in Gurgaon, explains how to read them, and shows how much material a house actually needs, so you can check any quote with confidence.
How to read these rates: they are indicative ranges, not quotes. Prices move with brand, grade, dealer, delivery distance, and order size. Always ask for a written, GST-inclusive bill rate before you buy.
Today's Rates at a Glance (Gurgaon, November 2026)
|
Material |
Unit |
Indicative Rate |
Notes |
|
Cement, PPC |
50 kg bag |
₹335–390 |
Dealer listings, Oct 2026 |
|
Cement, OPC 43 |
50 kg bag |
₹385–430 |
Premium variants cost more |
|
Cement, OPC 53 |
50 kg bag |
₹437–480 (avg about ₹459) |
Price tracker, Oct 2026 |
|
TMT steel Fe500D (8–25 mm) |
per kg |
₹61–67 |
About ₹61,000–67,000 per tonne |
|
TMT steel, premium national brands |
per kg |
about ₹3–5 more |
Brand premium over local mills |
|
M-sand |
per tonne |
₹1,200–2,500 |
Varies by supplier and delivery |
|
River / Yamuna sand |
per tonne |
₹1,800–2,450 |
Supply and quality vary |
|
Coarse aggregate 20 mm |
per tonne |
₹1,020–1,610 (avg about ₹1,315) |
Price tracker, Oct 2026 |
|
Red clay brick |
per piece |
₹8–11 |
Some dealers quote up to ₹15 |
|
Fly ash brick |
per piece |
₹6–8 |
Some dealers quote up to ₹13 |
|
AAC block, 6-inch |
per piece |
about ₹40–95 |
Large brand differences |
Sources: construction price trackers (August to October 2026) and Gurgaon dealer listings. Rates exclude labour and may exclude GST and delivery. Quotes from individual dealers vary, so treat this table as a benchmark, not a price list.
Cement Price Today in Gurgaon
Cement is roughly 10 to 15% of total project cost. A Gurgaon price tracker put OPC 53 at around ₹459 per 50 kg bag in October 2026, while dealer listings for PPC run noticeably lower. A few things to know:
1. Which grade: For typical residential construction up to G+2, OPC 43 or PPC is generally adequate. OPC 53 is mainly needed for higher-strength concrete (M30 and above). Your structural engineer decides.
2. PPC vs OPC: PPC is usually cheaper and gains strength more slowly. OPC reaches early strength faster. Both are standard.
3. GST: GST on cement was cut from 28% to 18% in September 2025, per EY's summary.
4. Bulk discount: Orders above about 50 bags can get ₹10 to ₹20 per bag off from authorised dealers.
TMT Steel Rate in Gurgaon
Steel is the single biggest material cost, around a quarter of material spending. A Gurgaon tracker listed Fe500D 12 mm at roughly ₹64 per kg (₹61 to ₹67) in August 2026, and a B2B marketplace listed Fe500D at about ₹64,800 per tonne ex-Gurugram. Some supplier pages advertise ₹52 to ₹58 per kg, so always check what is being quoted: brand, grade, bar size, and whether it is ex-works or delivered.
1. Always specify Fe500D or higher: for residential work. It offers better ductility, which matters in a seismic zone.
2. Ask for the mill and a test certificate: Premium national brands usually cost ₹3 to ₹5 per kg more than local mills.
3. Price swings are real: Steel is the material most likely to move between your quote and your purchase.
Sand and Aggregate Rates in Gurgaon
Sand pricing in Gurgaon is the least consistent, because supply of river sand is restricted and prices can swing sharply. Many builders now use M-sand (manufactured sand conforming to IS 383) for structural work, and keep finer plaster sand for finishing coats.
1. M-sand: about ₹1,200 to ₹2,500 per tonne, depending on supplier and delivery distance.
2. River/Yamuna sand: about ₹1,800 to ₹2,450 per tonne. Very low advertised prices are often for fill-grade sand, not construction-grade.
3. 20 mm aggregate: about ₹1,020 to ₹1,610 per tonne. Buying more than about 10 tonnes directly from a quarry can save ₹150 to ₹300 per tonne.
Sand units explained: 1 tonne of dry sand is about 22 cubic feet (cft). 1 brass is 100 cft, or about 4.5 tonnes. To convert a per-tonne price to per cft, divide by 22. Always confirm whether a quote is per tonne, per cft, or per brass before comparing.
Brick and Block Rates in Gurgaon
1. Red clay bricks: ₹8 to ₹11 per piece in tracker data.
2. Fly ash bricks: ₹6 to ₹8 per piece. Check water absorption and strength before buying large quantities.
3. AAC blocks: per-piece prices look high (roughly ₹40 to ₹95 for a 6-inch block, depending on brand) because each block is much larger than a brick, so compare per cubic metre. AAC needs thin-bed mortar, which adds a small cost per sq. ft.
How Much Material Does a House Need?
These are planning thumb rules for a standard RCC house of up to about four floors, per sq. ft. of built-up area. Your structural engineer's bar bending schedule is the final word.
|
Material |
Per Sq. Ft. |
For 1,000 Sq. Ft. |
|
Cement |
0.4–0.5 bag |
400–500 bags |
|
Steel |
3.5–4.5 kg |
3.5–4.5 tonnes |
|
Bricks |
8–10 pieces |
8,000–10,000 |
|
Sand |
about 1.2–1.8 cft |
about 1,200–1,800 cft |
|
Coarse aggregate |
about 1.35–2 cft |
about 1,350–2,000 cft |
Sand and aggregate figures vary widely between sources, so treat them as rough. Add 5 to 10% for wastage.
Worked Example: Core Materials for 1,000 Sq. Ft.
This is an illustration using the midpoints of the ranges above, not a quote:
|
Item |
Quantity |
Assumed Rate |
Cost |
|
Cement |
450 bags |
₹380 |
₹1.71 lakh |
|
Steel |
4,000 kg |
₹64 |
₹2.56 lakh |
|
Fly ash bricks |
9,000 |
₹7 |
₹0.63 lakh |
|
M-sand |
1,500 cft (about 68 tonnes) |
₹1,428 per tonne |
₹0.97 lakh |
|
Aggregate |
1,500 cft (about 68 tonnes) |
₹1,315 per tonne |
₹0.89 lakh |
|
Total |
about ₹6.8 lakh |
That is roughly ₹680 per sq. ft. for these five materials. Turnkey construction in Gurgaon generally runs ₹1,850 to ₹3,000 per sq. ft., because it also covers labour, finishing, plumbing, electrical, approvals and supervision. See our construction cost per sq. ft. guide for the full breakdown.
When Do Prices Move?
1. Monsoon (June to September): typically sees demand soften, with cement prices easing by roughly 5 to 8%.
2. January to March: is peak demand, and prices usually firm up by about 3 to 5%.
3. Steel and sand: can move within weeks, so don't assume a rate from last month still holds.
Our guide to the best time to start construction in Gurgaon explains how timing affects cost and schedule.
Buying Tips and Quality Checks
1. Cement: check the manufacturing date, and use bags within about 90 days. Reject torn or lumpy bags. Buy in stages, not all at once.
2. Steel: check the grade marking, mill test certificate, and BIS mark. Weigh a bundle if you can.
3. Sand: M-sand should be clean and graded to IS 383. Excess clay or silt weakens concrete.
4. Bricks and blocks: look for uniform size and a clear ringing sound. Reject cracked or over-absorbent pieces.
5. Always take a GST bill. It protects you in quality disputes and warranty claims.
Poor material quality is expensive later. Read why concrete quality matters.
How to Use Construction Material Rates in Gurgaon When Comparing Quotes
1. Buying materials yourself (labour contract): use the table to check dealer bills and watch for inflated rates or short quantities.
2. Hiring a turnkey company: ask for the material specification, such as cement type, steel grade, and brick or block type, written into the contract. Then the quote is firm even if market prices move. See our guide on comparing contractor quotes.
Want a Quote With Current Construction Material Rates in Gurgaon Locked In?
At Rever Homes, costing and material specifications are set out in writing before work begins. Talk to our team, see our turnkey packages, or try the free cost calculator.
Related reading: Construction Cost per Sq. Ft. in Gurgaon · Our Construction Process · Services · Explore More Guides